Does anyone have a reference book or dvd that can be recommended to teach someone how to make a LOTO plan using P&ID's. This may be a combination of P&ID tranings as well but ultimately my end goal is to be able to mark up a P&ID for any piece of equipment found on a P&ID for a chemical processing plant. Any assistance is appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Learning LOTO plans using P&IDs
- Thread starter civilbill
- Start date
- Thread starter
- #3
Thealanator
Electrical
A P&ID may not give all the information you need to safely lock something out. Electrical energy, energy in springs and weights are a few things that come to mind.
make sure that all the valves (whether control, on-off, relief, isolation) whatsoever the size is should be tagged. apart from this i do not think there is LOTO things you need to include in your P&ID. LOTO procedure is usually a standard safety procedure available with all companies and also mentioned in the safety pages of the equipment operation and maintenance manual.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Question