Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Laser Etching Resources

Status
Not open for further replies.
Bicky22

Bicky22

Mechanical
Joined
May 15, 2014
Messages
58
Location
US
Hi,

Does anyone have any good web links/resources for laser etching practice? Handbook for Laser Etching engineering?

I have a laser etcher that runs well with Carbon Steel but poor with Nickel and Brass (even after playing with some settings). Also will sometimes will run inconsistent.

I don't have enough experience to know what to look for. I am looking for a practical and in depth resource on the subject.

Thanks All.
 
Status
Not open for further replies.

Similar threads

B
  • Question Question
how to laser cut a cylinder
Replies
0
Views
5K
Bluces
B
D
  • Question Question
Amada lc2415 laser panel won’t power on
Replies
2
Views
3K
Bluces
B
M
  • Locked
  • Question Question
AMADA LC1212 ALPHA iii LASER MACHINE /HELP!
Replies
3
Views
3K
Well Oiled Machine
Well Oiled Machine
S
  • Locked
  • Question Question
LD1 Alarm Amada 6kW Fiber Laser
Replies
0
Views
1K
SiemensN00b
S
B
  • Question Question
Will there be problems with the cutting section if the laser cutting speed is too fast or too slow?
Replies
3
Views
557
IRstuff
IRstuff

Part and Inventory Search

Sponsor

Back
Top