Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Laser cutting 4150 steel plate

Status
Not open for further replies.
SGAFFNEY

SGAFFNEY

Mechanical
Joined
Mar 9, 2013
Messages
27
Location
US
Does anyone have experience cutting 4150 steel plate on a CO2 laser? I have a customer with 3 & 4Kw CO2 lasers that needs to quote a job from 8.5 mm (aprox 5/16 thick) plate. Any advice would be greatly appreciated.
 
Sort by date Sort by votes
I have previously cut with same settings as cutting 44w with very good results.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

B
  • Question Question
Will there be problems with the cutting section if the laser cutting speed is too fast or too slow?
Replies
3
Views
521
IRstuff
IRstuff
B
  • Question Question
how to laser cut a cylinder
Replies
0
Views
5K
Bluces
B
Garrett Green
  • Locked
  • Question Question
Mazak Laser having trouble cutting 1/2" Material
Replies
0
Views
1K
Garrett Green
Garrett Green
Hans H.
  • Locked
  • Question Question
Anti spatter for laser cutting?
Replies
1
Views
1K
Rex Hang
Rex Hang
D
  • Question Question
Amada lc2415 laser panel won’t power on
Replies
2
Views
3K
Bluces
B

Part and Inventory Search

Sponsor

Back
Top