Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

laser cuttin aluminum nitride

Status
Not open for further replies.
aln12

aln12

Mechanical
Oct 24, 2002
1
I am a laser tech and need some hints on how to cut aluminum nitride with a co2 laser. I can cut it now but the laser is leaving black in the holes. Thickness ranges from .010"-.035". Any help will be apriciated.
 
Status
Not open for further replies.

Similar threads

D
  • Question
Amada lc2415 laser panel won’t power on
Replies
2
Views
3K
Bluces
B
M
  • Locked
  • Question
AMADA LC1212 ALPHA iii LASER MACHINE /HELP!
Replies
3
Views
3K
Well Oiled Machine
Well Oiled Machine
S
  • Locked
  • Question
LD1 Alarm Amada 6kW Fiber Laser
Replies
0
Views
1K
SiemensN00b
S
Garrett Green
  • Locked
  • Question
Mazak Laser having trouble cutting 1/2" Material
Replies
0
Views
1K
Garrett Green
Garrett Green
Hans H.
  • Locked
  • Question
Anti spatter for laser cutting?
Replies
1
Views
899
Rex Hang
Rex Hang

Part and Inventory Search

Sponsor

Back
Top Bottom