if anyone is using a Mitsubishi 3015ex s laser i would like some advice on cutting conditions for 12 gaug galv I had a reply for Jacobson thx. no pdf book .this shop only lasers galv steel and only running Ox I know in the book said 2 nozel with 7 lens then that was it .if ther is a book to use to get me close then I can adjust cnditions as I go . thx
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
laser condition settings .
- Thread starter meps11
- Start date
![URL]](https://res.cloudinary.com/engtips/image/fetch/w_800,c_lfill,q_auto,f_auto,g_faces:center/[URL unfurl="true"]http://hi-tecdesigns.com/images/pictures/Footwell%20Animation%20Tiny.gif[/URL])
