Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

large electric submersible motors

Status
Not open for further replies.

Mumo

Civil/Environmental
Joined
Sep 13, 2005
Messages
2
I am working on a large water pumping plant, and due to the field conditions submersible pumps are desirable. Each unit would be rated about 25,000 GPM @ a head of about 120 ft.I have tried KSB Germany, but have not been successful. I am looking this type of equipment.
mumo
 
I don't think this is an electrical or control issue. You should re-post this in the Pump Engineering forum
forum407

When you are done, please red-flag your original post so that you are not cross-posting.
 
The pump capacity is 25,000 GPM @ 120 ft. of head.
Thanks I will be seeking the Pump forum.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top