Large Diameter Tank Welding fixture / positioner

[rbrez]

I am looking for names of companys that supply fixtures to hold/clamp two large diameter(90"plus)tank shells together so their circumferencial seams can be welded. The fixtures can clamp either internaller or externally.

Thanks

 

[desertfox]

Hi rbrez

Why don't you try a search?

regards
desertfox

 

[rbrez]

Desertfox - I have been trying for about 3 hours with no success. That is why I thought I would try this web site.

regards
rbrez

 

[desertfox]

Hi rbrez

Have alook at this people

http://www.usedweldingequipment.com/weld_positioning_information.htm

Regards

desertfox

 

[rbrez]

Desertfox - Thamk for the web site. It is one of many that I had already went through already. They do not have the equipment I am looking for.

rbrez

 

[desertfox]

Hi rbrez

Sorry you already seen these people all I can suggest is you keep looking.


regards

desertfox

 

[unclesyd]

You should give these people a call.
There are places where you can rent/lease these clamps.

http://www.mathey.com/112.htm

 

[EdStainless]

You can try to go through the guys that make the welders, AstroArc, Arc Machines, and such.

= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection

http://www.trent-tube.com/contact/Tech_Assist.cfm

 

[arto]

Try Dearman Clamps:

http://www.mathey.com/documents/2004Clamping.pdf

per their catalog pg 16, their double chain clamps can handle up to 20ft/6m diameter.

 

[stanweld]

Try

http://www.fitupgear.com

 

[unclesyd]

A little late. They have both new and used equipment.

http://www.weldplus.com/turnroll.asp