Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Laminate failure index under SINE vibration analysis

Status
Not open for further replies.
Naffoussi

Naffoussi

Structural
Joined
Mar 19, 2012
Messages
204
Location
FR
Hi all,

Does anyone know if it is possible to extract laminate failure index under Sine vibration analysis? I've tried to import both .op2 and .xdb output files,
but no results were imported in Patran ! am I missing something?

Thanks,
 
Status
Not open for further replies.

Similar threads

martin555
  • Locked
  • Question Question
Strenght Ratio is Zero but I have a Failurer Index
Replies
0
Views
847
martin555
martin555
N
  • Question Question
Patran/Nastran Buckling Analysis – SYSTEM FATAL MESSAGE 7340 (LNNHERR)
Replies
1
Views
6K
ThomasH
ThomasH
N
  • Question Question
Nonlinear Buckling Analysis after Pretensioning (Wrinkling Study – Patran/Nastran SOL 400)
Replies
0
Views
5K
Nic0
N
S
  • Locked
  • Question Question
Problem in Modal analysis
Replies
5
Views
4K
BlasMolero
BlasMolero
Itxusta
  • Locked
  • Question Question
2d axisymmetric analysis of a revolution part
Replies
3
Views
1K
Itxusta
Itxusta

Part and Inventory Search

Sponsor

Back
Top