Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Labelling user subroutine State variables for easier post-processing

Status
Not open for further replies.
Wenani34

Wenani34

Industrial
Joined
Aug 2, 2010
Messages
1
Location
DK
Hello,

Does anyone know how to label user subroutine state variables (fx. in UMAT etc) such that they apear as what they are instead of the standard "SDV1", "SDV2" etc. that Abaqus automatically calls them?

I'm tired of renaming each SDV when making grafs and images during postprocessing.

Any comments are appreciated!

Wenani
 
Status
Not open for further replies.

Similar threads

I
  • Locked
  • Question Question
Abaqus subroutine
Replies
3
Views
4K
FEA way
FEA way
I
Abaqus Subroutine
Replies
4
Views
6K
FEA way
FEA way
Balamugesh M
  • Locked
  • Question Question
Abaqus user subroutine problem
Replies
12
Views
2K
IceBreakerSours
IceBreakerSours
M
  • Locked
  • Question Question
Assistance with VUHARD Subroutine in Abaqus
Replies
3
Views
3K
FEA way
FEA way
nilesh_dot
  • Locked
  • Question Question
Problem during linking - Abaqus/Standard User Subroutines
Replies
2
Views
1K
nilesh_dot
nilesh_dot

Part and Inventory Search

Sponsor

Back
Top