Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
journal to update for external change command?
- Thread starter aluminum2
- Start date
JohnRBaker
Mechanical
Are you doing this simply because you want to avoid having to navigate to the function via the...
Tools -> Update -> Update for External Change
...menu sequence?
If so, perhaps you were unaware that you can use Customize and assign any menu item to an icon on a toolbar so that you can execute the function with a single gesture.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
Tools -> Update -> Update for External Change
...menu sequence?
If so, perhaps you were unaware that you can use Customize and assign any menu item to an icon on a toolbar so that you can execute the function with a single gesture.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
JayeshPalekar
Mechanical
I am also looking for the same kindly help.
JayeshPalekar
Mechanical
Dear Experts
Kindly give any suggestion for it.
Regards
Jayesh
Kindly give any suggestion for it.
Regards
Jayesh
- Status
