Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Joining SS to Bronze Casting
- Thread starter gibster1
- Start date
What type joint a you looking for? We used Everdue 1010 brazing rod on all jobs where the bronze or brass was amendable to same. These were all braze joints and and had to be treated as same. Hi temp silver solder, paste or stick depending on the joint design, can also be used, again if the brass or bronze is ammendable. I dont think you can get any joint to fly if by any code.
"Nico-Braze" is one material we also used. This material required a very skilled welder
"Nico-Braze" is one material we also used. This material required a very skilled welder
- Status
Similar threads
- Locked
- Question
- Locked
- Question