Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Jacketed Coil Pipe 1
- Thread starter 1ton
- Start date
-
1
- #2
Your size is rather large for jacketed pipe with bends but you might give these people a call.
- Thread starter
- #3
We had jacketed pipe fabricated both in the UK and Germany when we had facilities there.
Our big bends 16"/20" , mitered due to radius, were fabricated in Germany but I have no notes nor does anyone else I called on who was the fabricator. I'll keep checking.
CSI has a rep in the Netherlands.
Your project is going to extremely expensive to design and build as posted.
Our big bends 16"/20" , mitered due to radius, were fabricated in Germany but I have no notes nor does anyone else I called on who was the fabricator. I'll keep checking.
CSI has a rep in the Netherlands.
Your project is going to extremely expensive to design and build as posted.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question