Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Isolation Valves at high pressure & high temperature? 2

Status
Not open for further replies.

BGD011

Mechanical
Joined
Apr 2, 2004
Messages
32
Location
US
Could you, please tell me do you know any company that I can contact it about a 3" Flanged 300# Isolation Ball Valve on Boiler Feed Water line with 400psi and temperature up to 300^F?
Thank you in advance!
 
Our bid list is usually:
Jamesbury
Mogas
Valve Technologies
Velan

You might have better luck with a local dealer if you're just looking for one off the shelf valve, though.

There are a bunch of other companies out there, but this list will get you started, anyway.

Make sure you specify full port. You may end up with cavitation in some circumstances and you don't want a restriction going through the valve.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top