Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Is there any ways to convert Note entity to Text

Status
Not open for further replies.
UGMasters

UGMasters

Automotive
Joined
Jan 22, 2008
Messages
51
Location
CA


Hi everyone,

I exported (Note format) the Ej pin numbers from Ejector table drawing and brought into the assembly,
unfortunately I can not export note file for machining,Is there any ways to convert Note entity to Text
or is there any single line font type for Note (Like modern in Text)

Regards
Girish
 
Status
Not open for further replies.

Similar threads

CAD2015
  • Locked
  • Question Question
Is it possible to convert cgm to drawing?
Replies
2
Views
2K
CAD2015
CAD2015
Kenja824
  • Question Question
NX2027 - Is there a fix or is this a Glitch
Replies
4
Views
5K
Rob_N
Rob_N
NXsupport
  • Locked
  • Question Question
Is there a quick way to dynamically move a datum place across a body to measure minimum wall thickness
Replies
3
Views
5K
Toost
Toost
NXsupport
  • Locked
  • Question Question
Is there a way to make extrude dialog remember the limits options set in the dialogbox
Replies
3
Views
3K
Ammaniya
A
CAD2015
  • Question Question
Convert components from an assembly into one single part.......
Replies
5
Views
7K
CAD2015
CAD2015

Part and Inventory Search

Sponsor

Back
Top