Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

IS Laddale analysis is mandatory of IS2062 materialfor 2nd conversion agent

Status
Not open for further replies.
Aakashjha

Aakashjha

Mechanical
Joined
Mar 18, 2012
Messages
15
Location
IN
I have purcghased few of the structural material from the conversion agaent, not a orginal manufacturar.
My question is " IS Laddale analysis is mandatory of IS2062 material for 2nd conversion agent , is they have to mentioned in their MTC? "

Prompt action will be highly appriciated

Regards
Aakash Jha
 
Status
Not open for further replies.

Similar threads

W1987
  • Question Question
GMAW shotcircuit - Lack of fusion
Replies
10
Views
9K
David3399
D
C
  • Locked
  • Question Question
Modification of an EN 12952 certified boiler
Replies
0
Views
1K
carrabta
C
ishtechmech
  • Question Question
PWHT MULTIPLE TIMES ON THE SAME JOINT OF SA335P91 MATERIAL
Replies
9
Views
20K
Dhurjati Sen
Dhurjati Sen
BiPolarMoment
  • Question Question
Sharpness/Dullness Evaluation/Testing of non-standard cutting geometry
Replies
10
Views
5K
EdStainless
EdStainless
P
  • Locked
  • Question Question
General tolerance specification issue
Replies
7
Views
3K
dtimberlake
D

Part and Inventory Search

Sponsor

Back
Top