Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

is it possible to change drawing sheets arrangement?

Status
Not open for further replies.

JavadM

Mechanical
Joined
Apr 29, 2008
Messages
119
Location
US
hi all
how can i change drawing sheet arrangements?. for example i want to reorder last sheet to be first sheet of drawing.


best regards
Javad

NX12
 
Yeah -simply edit the last sheet to -say sheet number 03 - then first sheet to sheet number 02- then sheet number 03 change to sheet number 01 ....
Lklo
 
hi
but title block numbering do not cares about that!
 
I think you need to move all of the views around from sheets to get what you want. So the work flow I use, is create a new sheet. Move all of the views from the last sheet to that new sheet, move all the views from sheet 1 to the next to the last sheet, then move all of the views from the new last sheet to sheet 1. Delete the new sheet that was created. It goes pretty quick if you have everything associative to your views. Do not forget you can also copy and paste the stuff that is text, and table, and most of the other stuff. just a thought.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top