Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Is ADCATS now lost to history?

Status
Not open for further replies.
3DDave

3DDave

Aerospace
Joined
May 23, 2013
Messages
11,482
Location
US
With the retirement and apparent death of Kenneth Chase it seems like BYU has scrubbed the ADCATS program from their website; at least all publicly available documents are now 404 from links provided within the BYU search page.

Kinda sad to see it go and for the loss of Prof. Chase.
 
Status
Not open for further replies.

Similar threads

C
  • Question Question
Symmetric to Centerline note is given to below drawing attached, need to understand how manufacturer will punch the holes at what tolerance.
Replies
16
Views
26K
Burunduk
Burunduk
supergee
  • Solved
composite tolerance at lmc : is it nonsense?
Replies
13
Views
1K
Burunduk
Burunduk
F
  • Question Question
Use the Drawing title block linear tolerance to control a Diametrical callout size - is it correct?
Replies
3
Views
2K
Burunduk
Burunduk
supergee
  • Question Question
Is there a preferred true position standard?
Replies
9
Views
1K
mfgenggear
mfgenggear
mackra
  • Locked
  • Question Question
ECO form: "IS" "WAS" order
Replies
4
Views
3K
drawoh
drawoh

Part and Inventory Search

Sponsor

Back
Top