Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

is 2% slope on a bench or table uncomfortable? 1

Status
Not open for further replies.

KaBone

Civil/Environmental
Joined
Feb 16, 2009
Messages
64
Location
US
Let's say I have an open patio and i put a 2% slope on it for drainage. When the owners place their furniture on it, will they complain that their table and chairs are tilted? Basically, how much slope is too much for a tabletop?
 
1% is fine for drainage

2% is visible

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
 
If the patio is adjacent to a structure, I suggest also checking your local building code. For example, part of IBC calls for
"Impervious surfaces within 10 feet (3048 mm) of the building foundation shall be sloped not less than 2 percent away from the building."
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top