Romeo Mougnol
Electrical
Please, is it possible to use a single Interphase Power Controller on the load side for a full asymetric compensation of a line?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Interphase Power Controller for asymetric compensation
- Thread starter Romeo Mougnol
- Start date
- Status
If you mean one controller with multiple inputs to detect voltages imbalances and multiple outputs to switch the appropriate inter-phase capacitors in and out of service, of course just one can be used; but you must then ask, "What are the consequences of controller failure?" If they are unacceptable, a back-up controller with an appropriate auto-transfer scheme must be provided.
CR
"As iron sharpens iron, so one person sharpens another." [Proverbs 27:17, NIV]
CR
"As iron sharpens iron, so one person sharpens another." [Proverbs 27:17, NIV]
- Status
Similar threads
- Locked
- Question
- Question
- Locked
- Question