Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

InRoads Survey Styles

Status
Not open for further replies.

stigs

Civil/Environmental
Sep 14, 2007
2
US
Hi all,
I am working on setting up some styles through InRoads Survey 8.8. Im having trouble with the style manager editing my codes so that certain information will automatically work for the dtm and other information won't. Basically I took PADOTS .ini translatted it into .xin and now I need to be able to map the styles to work as breaklines or not in the dtm at all. Any tips or help is appreciated thanks.

Adam
 
Replies continue below

Recommended for you

You need to make the styles that you do not want in the DTM as DNC. Do not contour. This can be accomplished in the Survey Feature Table file on in the DTM, you can toggle on in the features under surface>feature properties and click on "exclude from triangulation"
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Top