Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

input file about RC column under cyclic loading needed

Status
Not open for further replies.
cemichaelliu

cemichaelliu

Structural
Joined
Jul 25, 2005
Messages
5
Location
CA
I am using ABAQUS to modelling confined concrete column under axial compression and cyclic lateral loading, but i am new user. Can anyone do me a favor to provide some similar input file or give me some hint on this topic? Thank you very much! Any suggestion are appreciated!
 
Sort by date Sort by votes
I suggested that you look at an ABAQUS/Standard Example Manual where you will find a "Dam" problem. This example would provide some insight of how to model concrete structure in ABAQUS.

Good Luck.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Adil Memet
  • Locked
  • Question Question
looking for input file
Replies
4
Views
2K
FEA way
FEA way
StanD_1
  • Locked
  • Question Question
*Include, Input error
Replies
1
Views
1K
FEA way
FEA way
abc123ali
  • Locked
  • Question Question
Cohesive zone modelling experimental input for simulation compatibility
Replies
2
Views
715
abc123ali
abc123ali
D
  • Question Question
(ABAQUS) Earlier Failure and Unrealistic Cracking of Reinforced High Strength Concrete Beam Under Bending Simulation
Replies
4
Views
15K
Daniel_LEE
D
abc123ali
  • Locked
  • Question Question
Difference in cohesive zone model results peak force for the same input data
Replies
5
Views
3K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top