Dancalifornia
Mechanical
Does anyone know what the Yick Sang equivalent texture is for Mold-Tech 11020 texture?
Thanks.
Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Injection mold tooling texture
- Thread starter Dancalifornia
- Start date
- Status
Quick searched popped up this gem over @ finishing.com...
Yick Sang YS 1287 appears closest to Mold-Tech MT-11020
Both textures are .0015" deep (.040 mm)
Both textures specify 2.5 degrees minimum draft.
Chris Loughnane - Product Design
Yick Sang YS 1287 appears closest to Mold-Tech MT-11020
Both textures are .0015" deep (.040 mm)
Both textures specify 2.5 degrees minimum draft.
Chris Loughnane - Product Design
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question