Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
initial/residual stress
- Thread starter bertin
- Start date
Stringmaker
Mechanical
What type of analysis are you trying to do? Be more specific as to what is causing this initial stress.
- Thread starter
- #3
It's a structural static analysis of a cantilever beam
with the first layer in polysilicon and the second in silicon nitride
and I'd like to specify an initial stress for polysilicon and an other for silicon nitride in order to see the deflection of the cantilever with only the initial stress of the two material
with the first layer in polysilicon and the second in silicon nitride
and I'd like to specify an initial stress for polysilicon and an other for silicon nitride in order to see the deflection of the cantilever with only the initial stress of the two material
harry123456
Automotive
Did you try the initial stress command in ANSYS?
Stringmaker
Mechanical
Another option is to induce a thermal stress.
- Status
Similar threads
- Locked
- Question