Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Infos about the Zencrack code

Status
Not open for further replies.
labosonic

labosonic

Industrial
Joined
Dec 5, 2003
Messages
13
Location
FR
Is anybody using (or has anybody used) the Zencrack code and the modulus associated with Abaqus ?
Have anybody informations about :
- the results it gives (if they are good or not)
- if it's easy to use
- if it's easy to install on a big computer-system ?
 
Status
Not open for further replies.

Similar threads

F
  • Locked
  • Question Question
How to Integrating the shear stress of the cross sectional area to find the moment M?
Replies
9
Views
6K
ThomasH
ThomasH
netsonicyxf
  • Question Question
Add supports in the Lusas model
Replies
1
Views
3K
rb1957
rb1957
netsonicyxf
  • Locked
  • Question Question
Why the symmetrical structure under self weight has unsymmetrical deformation?
Replies
3
Views
3K
netsonicyxf
netsonicyxf
imti7
  • Locked
  • Question Question
How to find the Max capacity of the foot bracket using FEA?
Replies
9
Views
983
geesaman.d
geesaman.d
Kamyar_K
  • Locked
  • Question Question
Changing the slip interface by loading rate
Replies
0
Views
372
Kamyar_K
Kamyar_K

Part and Inventory Search

Sponsor

Back
Top