pamccrac
Mechanical
- Sep 17, 2004
- 49
My company has recently upgraded to NX6 from NX3 and we have some legacy projects that take some time when opening. Whenever switching from modeling to manufacturing it seems that some checks are performed and an information file is displayed with:
Attribute in: "toolpathname"
NON_CUTTING_MOVES_911
Engage & retract moves to clearance geometry are no longer supported and should be defined in the approach & departure moves
I understand what the message is telling me but i would like to turn this check off is possible. this list is extensive depending on the number of toolpaths in this project. Needless to say this takes a long time as well. my question... is there a way to turn this function off so that I will not have to wait on this every time i move in and out of mfg?
Attribute in: "toolpathname"
NON_CUTTING_MOVES_911
Engage & retract moves to clearance geometry are no longer supported and should be defined in the approach & departure moves
I understand what the message is telling me but i would like to turn this check off is possible. this list is extensive depending on the number of toolpaths in this project. Needless to say this takes a long time as well. my question... is there a way to turn this function off so that I will not have to wait on this every time i move in and out of mfg?
