Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

inertia dyno- weight of drum

Status
Not open for further replies.
89lx

89lx

Automotive
Joined
Dec 7, 2005
Messages
1
Location
US
I am contemplating building an inertia dyno for automotive engines up to 1000 hp. I have been searching a little but have not found any info on determining how much the drum should weigh. Any math formulas or info would be appreciated. thanks Andrew
 
Status
Not open for further replies.

Similar threads

sierra4000
  • Locked
  • Question Question
Fine Dyno tuning
Replies
8
Views
6K
sierra4000
sierra4000
revvedmoto
  • Locked
  • Question Question
Dyno Cell- Exhaust extraction vs Fuel tune
Replies
5
Views
1K
ant180
ant180
SteveV60
  • Locked
  • Question Question
Cylinder Pressure at bottom of power stroke
Replies
4
Views
2K
enginesrus
enginesrus
XR250
  • Locked
  • Question Question
Is there a Standard Definition of Lugging an Engine?
Replies
11
Views
2K
TugboatEng
TugboatEng
X49
  • Locked
  • Question Question
Temperature Rise of Oil Film on Cylinder Liner
Replies
1
Views
653
lucky-guesser
lucky-guesser

Part and Inventory Search

Sponsor

Back
Top