Induction Generator

[okivrak]

I want to design an induction generator on MATLAB-Simulink for a wind power application. Can anyone tell a tutorial or a made simulation of induction generators? Their torque-speed response, design parameters etc.

Thank You.

 

[electricpete]

jbartos recently published link for matlab simulation of induction motors.

 

[electricpete]

Here's the link I mentioned. Pretty basic stuff... not sure if it'll help.

http://power.ece.drexel.edu/coursesweb/ECEP352/InductionMotorSimulation.pd

 

[jbartos]

Suggestion: Visit

http://www.mathworks.com/products/simulink/technicalliterature.shtml

http://www.mathworks.com/consulting/integration.shtml

etc. for simuling-tips.

 

[Lewish]

Hi okivrak, what you really want is the "Power System Blockset". This will give you a complete model for a motor, either synchronous or asynchronous. By inputting negative torque into the model, it becomes a generator. You can then build a block to model the wind energy and see the power output of the generator. This is the best way I know to do it and get real-world results.

 

[jbartos]

Suggestion: Visit

http://www.mathworks.com/products/powersys/

for the power system blockset for Simulink
Notice, that the literature is posted in my previous posting