Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Incrementing non-numeric cells?

Status
Not open for further replies.

Tomfh

Structural
Feb 27, 2005
3,613
Hi,

Say you have the text "T1" in a cell, how can you fill-down so that the cells below it auto increment to T2, T3, T4, etc

Thank you.
 
Replies continue below

Recommended for you

You could format the cells "T"0 using the custom option, and then just fill 1 to whatever.
 
Hello,

What wrong with selecting the cell, place the cursor over the bottom right hand corner and drag down as far as necessary. This will increment them.

----------------------------------
Hope this helps.
----------------------------------

maybe only a drafter
but the best user at this company!
 
And if you like a menu option instead: select the range you want to fill, with the cell containing T1 as the first cell, then choose Edit/Fill/Series from the menu. Set Type to Autofill.

Cheers,
Joerd

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor