Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Incorrect label on report

Status
Not open for further replies.

gadwall

Civil/Environmental
Joined
Aug 8, 2006
Messages
10
Location
US
When I printed out a report for a local municipality, I noticed that I had chosen Paved Roads w/curbs & sewer for Type B soil. The CN is 98. The report shows that the area is 100% pervious. Should it not be listed as impervious? I don't know if any one else has seen this or not. I am running v8.
 
When I tried "Paved roads w/curbs and sewers" is was correctly reported as impervious. If you still have problems you can send the HydroCAD .HCP file to support@hydrocad.net Please indicate the exact node and report in question.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top