I'm looking for info on the wear characteristics of cast IN 100 on cast IN 100 at elevated temperatures, from 500°F to 1900°F. I'm hoping I won't have to apply a wear coating for a test that lasts under 500 hrs over the specified temperature ranges with low stresses, under 10,000 psi.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
IN 100 on IN 100 wear characteristics
- Thread starter borjame
- Start date
Contact your supplier of material. They may have done some basic friction and wear tests.
Alternativelky, you should consult published information on similar materials.
I think it is hard to find wear data for special materials, particularly for elevated temperature conditions.
Alternativelky, you should consult published information on similar materials.
I think it is hard to find wear data for special materials, particularly for elevated temperature conditions.
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question