Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Importing volume in Ansys workbench

Status
Not open for further replies.
aliesmal110

aliesmal110

Mechanical
Joined
Jan 28, 2013
Messages
5
Location
IR
Hi dears
I am working with ANSYS WORKBENCH 16 and my model is a standard bearing but when I import a STEP file to ANSYS the rollers of bearing are presented as surfaces and dont have volume.
I want to know if there is any solution for this problem.
Could I make volume from this surfaces in ANSYS WORKBENCH.
Thanks
 
Status
Not open for further replies.

Similar threads

raslraslov
  • Locked
  • Question Question
Setting up units in nCode when importing d3plot (ANSYS)
Replies
0
Views
566
raslraslov
raslraslov
YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV
D
  • Locked
Random vibration in ANSYS APDL using results from Linear Perturbation
Replies
1
Views
3K
hacksaw
hacksaw
manj1987
  • Locked
  • Question Question
Laptop specs and study material for Ansys workbench
Replies
0
Views
282
manj1987
manj1987
Sparky4598
  • Locked
  • Question Question
Materials database for Ansys mechanical
Replies
2
Views
505
Sparky4598
Sparky4598

Part and Inventory Search

Sponsor

Back
Top