Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Importing Sketches

Status
Not open for further replies.

Marcistat

Mechanical
Joined
May 12, 2010
Messages
6
Location
US
I have a particular sketch (logo) that i use quite often. Is there a way to import it from part to part? Also, will this allow me to re-size it for smaller uses?

This particular problem involves wrapping the logo onto different cups, and i want to make sure all the logos are the same.

Thank you
 
We just had a presentation at the NISWUG meeting on this. As long as you don't have to scale differently in X and Y a block is just the thing. You can use blocks in the wrap feature. I consider blocks as presolved sketches so applying the sketch as a block may save rebuild time for you.

You can also save your blocks to the design library to provide drag N drop capability.

TOP
CSWP, BSSE

"Node news is good news."
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top