Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
import step file into NX 10
- Thread starter hnam2003
- Start date
Assuming it was exported as an assembly...
In the import options, make sure the "flatten assembly" option is turned off.
www.nxjournaling.com
In the import options, make sure the "flatten assembly" option is turned off.
www.nxjournaling.com
Start NX.
Create a new part.
File - Import - Step 203
If you toggle on "flatten assembly" the result will be multiple solid bodies in the reulting file.
If it's off, you will get the same assy structure as somebody exported.
BUT, The resulting bodies WILL be dumb no matter how you import.
Step does not support feature history.
Regards,
Tomas
Create a new part.
File - Import - Step 203
If you toggle on "flatten assembly" the result will be multiple solid bodies in the reulting file.
If it's off, you will get the same assy structure as somebody exported.
BUT, The resulting bodies WILL be dumb no matter how you import.
Step does not support feature history.
Regards,
Tomas
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
