Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Impact test temperature for ASTM A 333 Gr.6

Status
Not open for further replies.
ligin18

ligin18

Petroleum
Joined
Nov 7, 2012
Messages
28
Location
AE
Hi All
The design temperature is for our project is -68 degree C.The material selected is ASTM A333 Gr.6.As per my understanding impact test temperature for ASTM A 333 gr.6 is -45 degree C.Please clarify whether impact test can be done at -70 degree Celsius for ASTM A 333 Gr.6 material.

 
Sort by date Sort by votes
This question seems better suited for the Piping forum or the ASTM forum rather than Valve forum here.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

AM14
  • Locked
FIRE SAFE TEST FOR BUTTERFLY VALVE AS PER API 607
Replies
1
Views
3K
Danlap
Danlap
AM14
  • Locked
  • Question Question
Fire Safe test for Butterfly valves
Replies
2
Views
3K
Danlap
Danlap
E
  • Locked
  • Question Question
Selection of solenoid valve for high pressure and high temperature spray experiment
Replies
0
Views
1K
ethan-111
E
Ratheesh_n
  • Locked
  • Question Question
Stellite 6 over Alloy 625 weld overlay
Replies
1
Views
1K
SPDL310
SPDL310
Bazinga
  • Question Question
API 6D - Specified Level for Hydrogen (SLH)
Replies
2
Views
4K
Bazinga
Bazinga

Part and Inventory Search

Sponsor

Back
Top