Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

I'm working on coil resonance and s

Status
Not open for further replies.

James glinski

Student
Nov 24, 2020
1
I'm working on coil resonance and several theories have come up I don't know which might be right .one says that the mass of the two coils must be the same as the other the next says that a quarter wave primary to a full wave secondary will resonate to getther.and a third says that not only the coils must be exactly 1/4 to 1 but the length of the lead wires must be included in the coil lengths.? I know you can tune a set of coils by loading them like in a intermediate coil string tunning with adjustable cores inductively or capacitively but this is just the coils and there leads .any ideas ?.thinks Jim.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor