Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

IEEE 944

Status
Not open for further replies.
Andy49

Andy49

Electrical
Nov 23, 2011
28
I came across a spec referencing IEEE 9444. Searching for the spec on IHS site states that it is discontinued. Two questions,
1. Is there a good substitute for this standard?
2. What are the pifalls of contniuing to use IEEE 944?
Thanks.
 
Status
Not open for further replies.

Similar threads

cuky2000
  • Locked
  • Question
Transformer MVA rating IEEE vs. IEC 2
2
Replies
21
Views
7K
prc
prc
jakande805
  • Locked
  • Question
IEEE type AC1A Exciter model in PSS/E
Replies
2
Views
348
jakande805
jakande805
NickParker
  • Locked
  • Question
IEEE 80 - Which fault to be considered?
Replies
3
Views
328
bacon4life
bacon4life
rockman7892
  • Locked
  • Question
IEEE 605 Fault Current for force calculations
Replies
7
Views
589
cuky2000
cuky2000
MULU007
  • Locked
  • Question
phase angle error limits for a C800 as per IEEE 1
Replies
2
Views
336
MULU007
MULU007

Part and Inventory Search

Sponsor

Back
Top Bottom