Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
idw dimension problem
- Thread starter Bvan
- Start date
- Thread starter
- #2
Ok, I have figured out part of my problem.
This problem is because the dimension is not actually an even dimension such as a 6'-0" dimension is actually 72.0001" and so the idw file dimension shows 6'-" letting me know that there is more there then just 72".
I know the easy solution would be to just change the part to show 72.0000 but this is a purchased part and we need to foresee and interferences with tolerance buildup. So it still would be nice if there was another solution to this problem.
If anyone can help I would be very happy!
This problem is because the dimension is not actually an even dimension such as a 6'-0" dimension is actually 72.0001" and so the idw file dimension shows 6'-" letting me know that there is more there then just 72".
I know the easy solution would be to just change the part to show 72.0000 but this is a purchased part and we need to foresee and interferences with tolerance buildup. So it still would be nice if there was another solution to this problem.
If anyone can help I would be very happy!
- Status
Similar threads
