Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Identify the changes

Status
Not open for further replies.
robcp

robcp

Automotive
Joined
Jul 28, 2004
Messages
41
Location
CA
What is the best way to determine the changes between two different engineering levels of the same component. Is any special method of overlaying the two parts and identify automatically the changes?
Thank you.

Rob
 
Sort by date Sort by votes
the healing wizard has an excellent comparison module.
 
Upvote 0 Downvote
Thank you JakeLiv.
 
Upvote 0 Downvote
Hi,

If you have DMU space analysis lic. you can use the Copare Products command to compare visually between 2 different levels. gives a good result.

Amit
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

sri91
  • Locked
  • Question Question
identify part or product document
Replies
2
Views
463
sri91
sri91
Bombas
  • Locked
  • Question Question
msgcatalog - name changes of front view e.t.c.
Replies
2
Views
341
Bombas
Bombas
Sidtha
Get the required proprties from the property window from the bundle segment in catia v5 using vba
Replies
3
Views
6K
crshears
crshears
A
  • Question Question
Does BOM have links to which drawings are using the parts in it?
Replies
0
Views
6K
aerostudent2618
A
xPAIVAx
  • Locked
  • Question Question
Parameters on the inserting windows tab parameters
Replies
0
Views
787
xPAIVAx
xPAIVAx

Part and Inventory Search

Sponsor

Back
Top