Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

I need Electric Specification for Class I Division I installation

Status
Not open for further replies.
vaaoc1425

vaaoc1425

Electrical
Joined
Nov 14, 2006
Messages
25
Location
US
I have a elecrical design going now for class I Division installation now.

I will greatly appreciate of somenoe can direct me to a link or a manufacturer where I can get an Electrical Specification on the subject.

Thank you in advance
 
Sort by date Sort by votes
Well, you don't say where you are, but I suppose that Class 1, Div 1 is US, so try Appleton or Hubble.
 
Upvote 0 Downvote
IEC 60079 is the international standard that is accepted in North America now.
 
Upvote 0 Downvote
Cooper-Crouse Hinds is another good source.

Good on ya,

Goober Dave

Haven't see the forum policies? Do so now: Forum Policies
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

srini1785
  • Question Question
IP65 PROTECTION CLASS FOR NON ELECTRICAL EQUIPMENT
Replies
18
Views
10K
jraef
jraef
charls1
  • Locked
Deionization water for electric cleaner
Replies
2
Views
3K
IRstuff
IRstuff
E
  • Locked
Electric motor terminal blocks
Replies
3
Views
2K
TugboatEng
TugboatEng
SF6-146
  • Locked
  • Question Question
Can I use EX db eb II B T4 Gb motors in an API centrifugation room with solvents?
Replies
1
Views
357
Gr8blu
Gr8blu
Prchick
  • Locked
  • Question Question
LEL determination in Class 1 Div 1 area
Replies
4
Views
717
Heaviside1925
Heaviside1925

Part and Inventory Search

Sponsor

Back
Top