Apr 6, 2004 #1 Oliveros Mechanical Joined Oct 15, 2003 Messages 23 Location CL somemody can tell me where can i find a software to get weld cost? thanks
Apr 6, 2004 #2 unclesyd Materials Joined Aug 21, 2002 Messages 9,819 Location US Here is website that has some software on welding costs. http://www.weldinginspectionsvcs.com/welding_and_qc_software.htm Here is a excellent book and very inexpensive. Design of Weldments by Omer Blodgett at the following website has an extensive discussion of welding cost. https://ssl.lincolnelectric.com/lincoln/spmount/item.asp?prodnum=DW Upvote 0 Downvote
Here is website that has some software on welding costs. http://www.weldinginspectionsvcs.com/welding_and_qc_software.htm Here is a excellent book and very inexpensive. Design of Weldments by Omer Blodgett at the following website has an extensive discussion of welding cost. https://ssl.lincolnelectric.com/lincoln/spmount/item.asp?prodnum=DW
Apr 6, 2004 #3 pipewelder1999 Industrial Joined Mar 17, 2002 Messages 309 Location US Most of the formulas used in the software at weldinginspectionsvcs.com are from http://www.esabna.com/EUWeb/FM_handbook/577fm8_1.htm . This may help you to have a better understanding of the input required. Gerald Austin Iuka, Mississippi http://www.weldinginspectionsvcs.com Upvote 0 Downvote
Most of the formulas used in the software at weldinginspectionsvcs.com are from http://www.esabna.com/EUWeb/FM_handbook/577fm8_1.htm . This may help you to have a better understanding of the input required. Gerald Austin Iuka, Mississippi http://www.weldinginspectionsvcs.com