I need a BASIC + Ladder PLC

[gogogadjet]

I need a BASIC + Ladder PLC + HMI,
I've looked at the CUSB from Comfiletech.com
and tri-plc.com's plcs,
has anyone had any experience w/ these products?

 

[tygerdawg]

I've used with success a system cobbled together from AutomationDirect.com . PLC + Basic Co-Processor module + a suitable HMI, communicating via RS232 to a robot + field devices.

TygerDawg

 

[nbucska]

I used BASIC with a 800 MHz Pentium to control three
stepper motor simultaneously, solve 3rd deg. equation
etc.

Whatever PLC can do, BASIC can, too.


Plesae read FAQ240-1032
My WEB: <

http://geocities.com/nbucska/>