Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

I have recently encountered a probl 2

Status
Not open for further replies.
AGVAS

AGVAS

Materials
Joined
Aug 29, 2003
Messages
6
Location
US
I have recently encountered a problem with weld seam corrosion. I read that the ferrite enriched-zone is more susceptible to corrosion but I really don't understand why and I would like to. Does it have something to do with the low carbon content in ferrite?
 
Sort by date Sort by votes
what is the metallurgy & thickness of material welded
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

M. BR
  • Locked
  • Question Question
Corrosion inside a tube
Replies
1
Views
2K
Magcargo
M
ENGRANIA
  • Locked
  • Question Question
Recently, the gas process component
Replies
4
Views
398
EdStainless
EdStainless
B
  • Question Question
Corrosion(?) on stainless at a waste water plant
Replies
9
Views
15K
Dhurjati Sen
Dhurjati Sen
b_unruhly
  • Locked
  • Question Question
Expected Surface Rougness of a Zn Phosphate treatment on a machined steel bar.
Replies
7
Views
3K
MintJulep
M
racookpe1978
  • Locked
  • Question Question
3/8-24NF Threads Rusting in an Outdoor 0.226 wall Galvanized CS Clamp. Should I Coat Threads?
Replies
7
Views
1K
racookpe1978
racookpe1978

Part and Inventory Search

Sponsor

Back
Top