Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

I have a design for 60" inside rein

Status
Not open for further replies.
Replies continue below

Recommended for you

Congratulations.

What's the question or issue you would like to raise?

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
 
I think the ref standard is this

ASCE_15-98_SIDD_usij15.jpg
 
having just a look to the mentioned ASCE standard, I have many doubts that the installation conditions (that is bedding type) will be only type 2 for such a great diam and depth of fill. Furthermore there is something strange to me : "page 1 - reinforcing layers 1" whilst "page 2 cage reinforcing type double circular"
 
I ran the program "Pipecar" with the data of your doc : result is overflow
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top