Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hyperlink inside a workbook

Status
Not open for further replies.

mohtogh

Chemical
Feb 21, 2001
144
Hi,
Is that possible I create a hyperlink in "Sheet 1" that it goes to "Sheet 2" of the same work book?

Thanks
 
Replies continue below

Recommended for you

You would need to pick a spot to go to on Sheet 2 but here's a couple of ways.

Use the Hyperlink function, for example, if the workbook you have open is named Book1 and you want to go to cell A1 on Sheet2, enter the following:
=HYPERLINK("[Book1]Sheet2!A1","Sheet2")

as an alternative

Right click the cell where you want to put a hyperlink and select Hyperlink from the pop-up menu.
In the Insert Hyperlink window select and complete the following:
Link to: Place in This Document
Text to display: Sheet2
Type the cell reference: A1
Or select a place in this document: Sheet2
Now click on "OK" to close the window
 
If you don't want to be dependent on the name of the file (because you might want to save it under another name), use the # sign:
[tt]=HYPERLINK("#Sheet2!A1","Sheet2")[/tt]

Cheers,
Joerd

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor