Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hydrolitic Ageing on PET

Status
Not open for further replies.
azerty43

azerty43

Materials
Joined
Oct 30, 2003
Messages
2
Location
DE
Hi

I'm looking for information about hydrolitic ageing on PET.
The Goal is to assure a lifetime of 125microns sheet of PET.
The average climate will be 30°C / 50° RH.

I want to know what will be the degradation under combined thermal (up to 80°C) & humidity (up to 95%RH) sollicitation.

I think about hydrolyse effect? Is there other effect that could appear? What kind of tests will analyse the hydrolyse effect? How can i define the accelerated factor?

Is there standards/books about ageing on PET?

Thanks
 
Status
Not open for further replies.

Similar threads

Tomoharu98
  • Locked
  • Question Question
Varying thickness in PET preforms
Replies
9
Views
2K
Pud
Pud
Nay Zaw
  • Locked
  • Question Question
Hi everyone, I'm working on prod
Replies
0
Views
774
Nay Zaw
Nay Zaw
Ali G.
  • Locked
  • Question Question
PET Production via direct esterification of PTA
Replies
0
Views
289
Ali G.
Ali G.
bcavender
  • Locked
  • Question Question
Source of Practical Information on Heat Bending PVC Extrusions
Replies
1
Views
1K
3DDave
3DDave
pro_cube
  • Locked
  • Question Question
PET sticky residue when heating with steam
Replies
2
Views
412
btrueblood
btrueblood

Part and Inventory Search

Sponsor

Back
Top