My company has a hydraulic dampener for landing gear that uses a bleed hole in the cam. I need to evaluate how much actual pressure is formed within the chamber where the fluid is bleeding out of at impact loading. Does anyone have a good reference for this kind of analysis?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hydraulic Dampener Analysis 1
- Thread starter jargon5
- Start date
-
1
- #2
It is easy enough to simulate pressure transients if you know how to solve system of non-linear differential equations using Runge Kutta. I do this using Mathcad. If have some info on how I do this here:
ftp.deltacompsys.com/public/pdf
See the hydsim files.
ftp.deltacompsys.com/public/pdf
See the hydsim files.
- Status
