Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hydration Enthalpy of Sodium Hydride. 1

Status
Not open for further replies.

bbqnw12

Chemical
Jul 15, 2003
14
Please, can anyone give me the actual value of the amount of heat given off (in KJ/mol) when Sodium Hydride reacts with water? And the stoichiometry of the reaction?
 
Replies continue below

Recommended for you

The reaction is

NaH(c) + H2O(l) --> NaOH(aq) + H2(g)

The actual amount of heat increases with the amount of water available to dissolve the NaOH, but the dilution would temper any temperature rise. The &[ignore]Delta[/ignore];HRxn below uses the value for NaOH(aq, 400 H2O):

&[ignore]Delta[/ignore];HRxn, 25 C = -112 + 0 –(-14) –(-68) = -30 kcal/mol

Data are from Perry’s, 7th ed.
 
Thank you very much, kenvlach. Very helpful.
 
Thank you very much, kenvlach. Very helpful.
 
The heat of reaction is 10% less if your product is concentrated sodium hydroxide solution. NBS Circular 500 gives the heat of formation of sodium hydroxide as a function of dilution. For example,
  NaH(c) + 4 H2O(l) --> NaOH:3H2O + H2(g)

delHRxn, 25 C = -108.9 + 0 –(-13.7) –(-68.3) = -26.9 kcal/mol
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor