Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

HR Steel Thickness Tolerance for .250 Thick

Status
Not open for further replies.
vendo

vendo

Mechanical
Joined
Nov 13, 2007
Messages
2
Location
US
I can not find the thickness tolerance to apply to HR Steel at .250
 
Sort by date Sort by votes
ASTM practice for plates (material 0.235" and thicker) is -0.01" / + 0.03" to 0.04" depending on width of plate.
ASTM A6 Table 1.
 
Upvote 0 Downvote
I might add that for pressure vessel use the thickness MAY go .010 undersize with no penalties -
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

lamar89
  • Question Question
Cold bend steel plate
Replies
3
Views
9K
TomLee777
TomLee777
mrmalcolm
  • Locked
  • Question Question
200 series austenitic stainless steel for low-temperature services
Replies
0
Views
1K
mrmalcolm
mrmalcolm
S
  • Question Question
Unknown Proprietary Steel Joist Identification
Replies
2
Views
9K
TomLee777
TomLee777
b_unruhly
  • Locked
  • Question Question
Broken Steel Casting with crystalized structure -- Root Cause
Replies
10
Views
5K
SwinnyGG
SwinnyGG
anne_pe
  • Question Question
Incorrect passivation type for 17-4 PH
Replies
12
Views
4K
mfgenggear
mfgenggear

Part and Inventory Search

Sponsor

Back
Top