Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to write Roman Numerals in NX Drafting Note
- Thread starter bisrana
- Start date
JohnRBaker
Mechanical
So you're saying that using strings of uppercase charactes such as I, V, X, C, M isn't adaquate? The reason I ask is because I'm not aware of ANY font (and by this I mean all of the TrueType and OpenType font out there) which has set aside special characters just for use when creating so-called 'Roman Numerals'.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
- Thread starter
- #3
Hi John
Thanks for your quick response. I am completely agree with your suggestion of using the English Capital Letters. But some places I use it as Symbols. (To reduce confusion between two). Where can I find all the special characters of NX?
Thanks in Advance
Thanks for your quick response. I am completely agree with your suggestion of using the English Capital Letters. But some places I use it as Symbols. (To reduce confusion between two). Where can I find all the special characters of NX?
Thanks in Advance
JohnRBaker
Mechanical
But you don't understand, there are NO special symbols for 'Roman Numerals'. They are what they are, period!
But before we go further, I need to know what version of NX you are using?
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
But before we go further, I need to know what version of NX you are using?
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
- Thread starter
- #5
JohnRBaker
Mechanical
OK, perhaps this might provide you with some help:
[URL unfurl="true"]http://www.eng-tips.com/viewthread.cfm?qid=298763[/url]
Also attached are a couple of files which shows the control character map for creating special symbols as part of an NX annotation object. Note that starting with NX 8.0, which now supports TrueType and OpenType fonts, your options with respect to what the content of a note can be in NX is greatly enhanced and while all of the existing 'special characters' (as shown in the attachments) are still supported, the use of so-called 'standard fonts' goes way beyond that.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
[URL unfurl="true"]http://www.eng-tips.com/viewthread.cfm?qid=298763[/url]
Also attached are a couple of files which shows the control character map for creating special symbols as part of an NX annotation object. Note that starting with NX 8.0, which now supports TrueType and OpenType fonts, your options with respect to what the content of a note can be in NX is greatly enhanced and while all of the existing 'special characters' (as shown in the attachments) are still supported, the use of so-called 'standard fonts' goes way beyond that.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
- Status
