Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to use the LMATRIX Command ?

Status
Not open for further replies.
Tininmartinez

Tininmartinez

Computer
Joined
May 13, 2003
Messages
5
Location
DE
Hello, i´m trying to use the LMATRIX command cause i want to calculate the mutual inductance betwwen two simple coils, but there is one error that sais : "The condictions for direct assembly have not been met. The following magnetic elements support direct assembly: 36,..... Use frontal solver (ESLV, front command) to obtain operating solution before computing inductance by the LMATRIX command macro". I have tried to make this but i do not why, it does not work, so i will be happy if someone can help me. Sure...

Thanks. Martin (Spain)
 
Status
Not open for further replies.

Similar threads

IJR
  • Locked
  • Question Question
On how and where to insert command snippets inside Workbench mechanical
Replies
2
Views
1K
IJR
IJR
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
M
  • Locked
  • Question Question
ANSYS Mechanical Scripting: how to delete an existing heatflux?
Replies
0
Views
812
MihailW
M
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
nashki
  • Locked
  • Question Question
UDL on the Curve of Elbow
Replies
0
Views
3K
nashki
nashki

Part and Inventory Search

Sponsor

Back
Top